• page_banner

JS PRODUCTS

SDS-plus Cross Cutter Rotary Hammer Drill Bit

Product Detail:

1. Large flute volume for fast drilling dust transport and less clogging.

2. Narrow flute back for reduced friction between bit and material.

3. Creates true round holes for anchors.


Application

● Drilling holes for concrete, stone, rock or brick.

● Drilling holes for post-installed rebar connections.

● Drilling drainage holes for drying out buildings.

● Drilling through-holes when you need to have an installation of pipes and cables.

● Drilling holes for screw installation.

Technical Data

● Material: 40CR+YG8C.

● Head Material Composition: Tungsten Carbide.

● Production Process: High temperature quenching, Surface sandblasting, Manual welding.

● Connection End: SDS PLUS

● Flute or Slot: Single/ Double

● Type of Tip: Crown Tip (Cross cutter)

● Number of Cutting Edges: 4

● Overall Length: 120-1200 mm (Normal length) – It can be customized.

● Diameter: 6-40 mm (Normal size) – It can be customized.

Product Advantages

1.Highest Drilling Speed- inclined side cutters provide fast concrete drilling.

2.Drilling Accuracy- wear mark indicator assures accuracy of hole diameter. Centric tip for optimal hole geometry and also provides rounder holes.

3.Optimized Flute Design- optimized flute design to reduce bit stress and make the bit run cooler.

4.Long Life- compact head for fast dust removal and longer life.

5.Heavy-duty- carbide-tipped bit heads are harder, tougher and more resistant and durable under heavy loads.

Size

Dia. Overall Length
4, 5, 5.5, 6, 6.5, 7, 8, 10 110
4, 5, 5.5, 6, 6.5, 7, 8, 9, 10, 12, 13, 14, 16 160
7, 8, 9, 10, 12, 14, 16, 18, 20 210
8, 10, 12, 14, 16, 22, 25 260
11 310
13, 15, 16, 18, 20, 22, 25 350
18, 20, 22, 25 450
18 460
18, 20, 22, 25 600
20, 22, 25 800
10, 12, 14, 16, 18, 20, 22, 25, 28, 30, 32, 35, 38 1000

*1) unit: mm
*2) other sizes free to consult

Packing

1 x Drill Bit / Plastic Tube

Packing can also be customized according to your requirements. Welcome to contact.

Instructions for Use

1. When drilling, keep the bit perpendicular to the processed object to avoid damaging the bit and yourself.

2. In the unlikely event of breakage, the drill bit will be considered for replacement as long as the wear mark on the helix is still visible. Timely changes will make your job easier.

Concrete Do not use lithium electric drill less than 6V Frequently used
Reinforced Concrete Please do not hit the steel bar in the process of use Frequently used
Hard Stone Please add water to use Generally used
Normal Stone Need to use impact function Frequently used
Hard Rock Need to add liquid cooling Generally used
Normal Rock Need to use impact function Frequently used
Masonry Can be shocked or not shocked,Moderate force during function drilling Frequently used
Usual Masonry Moderate force without impact function Frequently used